A Transfer Experiment on Wicker

I wondered if the transfer method I used to transfer a computer image to a garden pot would work on wicker.







I started with this old wicker tray.

I had nothing to lose with this one so I spray painted the 
whole thing gray with flat primer.

I printed out an image from Graphics Fairy and had my 
daughter help me cut it out and apply Modge Podge to the ink side of the image.


We flipped the image over, stuck it to the tray then let it dry overnight.



In the morning I wet the paper and rubbed with my 
fingers to remove the paper.


Then I let it dry.

There was a white film where the paper was and I got a little worried.

But I wet the film and rubbed some more.



I sprayed the whole tray with Perma Clear which made any residue disappear completely.



This was totally an experiment and I think it was pretty successful.

I got my inspiration from the beautiful gray tray at

Karen had luck transferring her image in a similar fashion to this wooden tray. 

I was happy to see I could get the same look on a wicker tray. 

I think the possibilities are endless.


I'm happy with the results, the image transfer worked pretty well considering it was done on wicker...

Thanks Karen for the inspiration!

I hope you enjoyed this project and you'll take a look at my Amazon Shop for craft supplies I recommend. Also while you're here please sign up for the Homeroad emails on my sidebar so I can send my latest DIY post straight to you. 

Homeroad
Homeroad

I am Susan, the author and creator at Homeroad. I am a wife of 28 years, the mother of 4 daughters, and the grandmother of 4 grandsons. I am a DIY Blogger and a part time PreK teacher.

Comments

  1. You printed out the image on your regular printer?? I have been wanting to do this type of thing, but I have an update printer and was told it wouldn't work. What is your opinion? the tray looks tre-chic! (I don't even know how to spell that.lol) Lesley

    ReplyDelete
  2. Hi Susan, that turned out great! I never thought about trying it on wicker. It looks so pretty. Thanks for mentioning my tray and linking to me. I'm glad I inspired you.

    ReplyDelete
  3. It's amazing the transfer worked on wicker! Thanks for experiment with it and for sharing. It looks great!

    ReplyDelete
  4. Very nicely done! It came out great!

    ReplyDelete
  5. The tray looks great and I love the grey finish! I must try this technique out someday - it seems pretty straight forward.

    ReplyDelete
  6. very cool
    blessings
    barbara jean
    enjoying catching up.

    ReplyDelete
  7. Cut a piece of wax paper to 8 1/2 X 11 and run it through the printer like normal. Then just iron it on and let it dry. follow up with a little sealer. I tried this and it workerd great.

    ReplyDelete
  8. This is awesome! I saw your tutorial featured over at vintagemellie and I stopped by to check it out. Thanks for giving us an alternative to vinyl!!!

    ReplyDelete

Post a Comment

Thank you for stopping by, I love your comments and I will do my best to reply to all your questions and comments. By leaving a comment you are consenting to your email being collected for communication purposes only. Your privacy is important to me.
Have a nice day.
Susan